True Bypass. HardWire pedals modify your guitar tone only when you want. HardWire pedals add pure effects when they’re on and don’t add noise when they’re off—truly the best of both worlds. And if you happen to lose power to HardWire pedals in the middle of a performance, you can keep playing because HardWire pedals switch to True Bypass mode until power is restored.
Higher Voltage . HardWire pedals preserve guitar tone because they operate at a significantly higher voltage than your standard pedals. HardWire pedals get the most out of hot guitar pickups and perform flawlessly in the high voltage environment of an amplifier effects loop.
Constant Voltage. HardWire pedals guarantee constant effects performance throughout the life of the battery and prevent tone loss because they operate at a steady voltage—independent of decaying battery voltage.
Tourworthy. HardWire pedals are designed for the touring musician. Unique Stomplock™ guards prevent controls from being kicked and your tone from being changed. Each HardWire pedal includes custom-cut Velcro® pads to fasten it to a pedalboard and green gaffer tape for the actuator label and see the pedal in the most adverse stage lighting conditions.
Smooth and out of the way:
1. Connect the HardWire RV-7 Stereo Reverb pedal before your amp or in your amplifier’s effects loop.
2. Set controls to:
- Level: 1 o’clock
- Liveliness: 10 o’clock
- Decay: 10 o’clock
- Mode: Room
3. Engage and leave.
Perfect for Reggae:
1. Connect the HardWire RV-7 Stereo Reverb pedal before your amp or in your amplifier’s effects loop.
2. Set controls to:
- Level: 12 o’clock
- Liveliness: 12 o’clock
- Decay: 1 o’clock
- Mode: Modulated
Play fast and turn it up:
1. Connect the HardWire RV-7 Stereo Reverb pedal before your amp or in your amplifier’s effects loop.
2. Set controls to:
- Level: 12 o’clock
- Liveliness: 12 o’clock
- Decay: Max
- Mode: Spring
3. For wilder reverb sounds, turn up the Liveliness control.
Inputs/Outputs
Inputs: Separate Left and Right ¼” Unbalanced (Tip-Sleeve)
Input Impedance: 1 MOhms
Outputs: Separate Left and Right ¼” Unbalanced (Tip-Sleeve)
Power
US and Canada: 120 VAC, 60 Hz Adapter: PS200R - 120
Japan: 100 VAC, 50/60 Hz Adapter: PS200R - 100
Europe: 230 VAC, 50 Hz Adapter: PS200R - 230
UK: 240 VAC, 50 Hz Adapter: PS200R - 240
Power Input: 9 VDC
Power Consumption: 640mW
Battery Type: Single 9 VDC
Battery Life: 4.5 Hours
General
Dimensions: 4” Width x 5.5” Length x 2.6” Height
Weight: 1.3 lbs
Specifications are subject to change without notice.
Owner's Manual (1.4 MB)
Sound Demo (Flash Required)
HardWire AD "Step Beyond"
Sound Technogy PLC HardWire Strikes Gold
Warranty Registration
DigiTech® pedals come standard with a
1 year limited warranty. Register
your pedal to extend the warranty to 6 years!