DigiTech® JamMan™ Looper/Phrase Sampler

$249*

*Estimated US Street Price

The legend continues. When we invented the PDS8000 pedal almost twenty years ago, it stored eight seconds of audio. Now we’ve reinvented it using removable CompactFlash™ memory to store up to 6.5 hours*! A wide range of features combined with ease of use make the DigiTech® JamMan® the perfect looper/phrase sampler for practicing, composing, and performing. The JamMan opens up new horizons to your musical explorations. Whether you’re performing alone and building many parts to develop a song or play in a full band, the possibilities are endless!

*With optional 2GB card

FS3X

optional FS3X Foot Controller

Features
Looper Modes
Configurations
Specifications

Features

Save up to 99 independent loops at one time
Store over 24 minutes of looping time on the included CompactFlash card
Upgrade to a 2GB card to store up to 6.5 hours of audio!
Connect to your computer via USB and never lose another loop ever again!
Record rhythm loops and solo over them on the fly, completely Hands-Free™
Load up the JamMan with bass lines, drums, harmonies, and more; create an entire backup band
Slow down or speed up any song without changing pitch to master that tricky riff

Looper Modes

Instrument or Vocal Looping

Simple and easy:

Select an empty memory location.
Select INST/MIC as the recording mode using the RECORD MODE button.
Press the REC/PLAY/OVERDUB footswitch to start recording.
When you are finished, press either the REC/PLAY/OVERDUB footswitch to have the phrase play back in a repeating loop or press the STOP/TEMPO footswitch to stop recording.

Recording with the Aux Input

Want to play along with pre-recorded material or spice up your set with sounds from soundtracks or samples?

Select an empty memory.
Press the RECORD MODE button repeatedly to and choose the one that lights the AUX INPUT LED.
Press the REC/PLAY/OVERDUB footswitch to start recording.
When you are finished, press the STOP/TEMPO footswitch to stop recording.
Press play to hear your recorded material.

Digital Delay Layers

Play into the layers:

Connect the HardWire DL-8 Delay/Looper pedal before your amp or in your amps effects loop.
Set controls to:

- Level: 12 o’clock
- Repeats: 12 o’clock
- Time: 9 o’clock
- Mode: 1 Second

Play into the delay for layered tones. For more layers, turn up the Repeats to 3 o’clock.

Solo Act Looper

Laying down loops is quick and easy:

Connect the HardWire DL-8 Delay/Looper pedal before your amp or in your amps effects loop.
Set controls to:

- Level: 12 o’clock
- Repeats: Minimum
- Time: 9 o’clock (adjust as needed)
- Mode: Loop

Hold down the foot pedal until the LED indicator turns red and play your loop. Release the foot pedal when done.
LED indicator turns green, loop automatically plays.
To add more layers, repeat step 3.

Configuration

Electric/Acoustic Guitar with Pedals
or Vocals

Click image to enlarge

Specifications

Digital
A/D/A Converters: 24-bit audio
Sampling Frequency: 44.1 kHz
USB
Type: USB 1.1 Full Speed, supports USB 2.0
Protocol: Mass Storage
Connector: Type B

Memory
CompactFlashTM: Type I solid state only (Type II cards or IBM/Hitachi Microdrives™ not supported)
Size: 8 MB to 2 GB
Capacity: 1 minute per 5.29 MB, 99 loops per card
File Format: FAT16 only
Audio Format: Uncompressed .wav 44.1 kHz 16 bit mono

Inputs/Outputs
Instrument/Guitar Input: 1/4” Unbalanced (Tip-Sleeve)
Input Impedance: 1 MOhms
Maximum Input Level: 11 dBu
Microphone Input: XLR Balanced (Female XLR, pin 2 Hot), not powered
Input Impedance: 600 Ohms balanced
Maximum Input Level: -7.5 dBu
Auxiliary Input: 1/8” Stereo (Tip-Ring-Sleeve), sums to mono
Input Impedance: 20 kOhms
Maximum Input Level: 0 dBu
Footswitch: 1/4” jack (Tip-Ring-Sleeve)
compatible with optional FS3X
Line/Headphone Output: 1/4” Mono (Tip-Ring-Sleeve)
Stereo headphone compatible with 50 Ohms
minimum impedance, driven by mono signal
Output Impedance: 100 Ohms
Maximum Output Level: 10 dBu

Power
US and Canada: 1 20 VAC, 60 Hz Adapter: PS0913B - 120
Japan: 100 VAC, 50/60 Hz Adapter: PS0913B - 100
Europe: 230 VAC, 50 Hz Adapter: PS0913B - 230
UK: 240 VAC, 50 Hz Adapter: PS0913B - 240
Power Input: 9 VAC 1.3 A
Power Consumption: 7 Watts

General
Dimensions: 6.7” Width x 5.6” Length x 2.6” Height
Weight: 2.88 lbs

Specifications are subject to change without notice.